Wall Print Installation
Here's how to install a wall print. Wall prints will only adhere to smooth walls. This material is not made for a textured or orange peel wall. If you have a textured wall you can frame your print as long as you don't remove the paper backing.
Things you'll need before you get started:
- Paper Towel
- Instructions (included)
Step 1: WIPE DOWN WALL WITH PAPER TOWEL
Before installing make sure your wall is clean and dry of any dust or dirt.
Step 2: LEVEL AND MAKE MARKS FOR YOUR WALL PRINT
Make two (2) line up marks with a pencil where you plan to place your wall print. Be sure the "line up marks" are leveled and straight on your wall.
Step 3: PEEL BACK TOP PART OF PAPER BACKING
Peel the top part of the paper backing from your wall decal. If your wall decal is larger than 3 feet, peel off the first 12" inches of your paper backing. You may need assistance if your wall print is large.
Step 4: APPLY DECAL TO "LINE UP MARKS"
Starting at the top, apply your decal to the two "line up marks" you have on the wall. Slowly press the exposed portion of the decal onto the wall.
Step 5: PULL REMAINDER OF PAPER BACKING DOWN
Once your wall print is secured on your wall pull the remainder of the paper backing downwards pressing your decal against the wall as you go.
Step 6: YOU ARE A ROCKSTAR WALL PRINT INSTALLER!
You are all finished up. Now enjoy the view of your new wall print.